You are here: > Home > Products > Encapsulated Tubing
Encapsulated Tubing
FEP Encapsulated Hydraulic Control Line Seamless Duplex 2507 Tubing
MEILONG offers a range of industry standard tubing encapsulated in a variety of materials, such as polyurethane, polyethylene and polypropylene. The specified tubing material within these encapsulations is available in a range of sizes and colors for a variety of applications.
Down hole tubes
Subsea umbilical’s
Process constructions
General control system
Steam supply lines
Gas transport lines
Instrumentation
Features of Encapsulated Control Line:
Maximize protection of downhole line
Increase crush resistance during installation
Protect control line against abrasion and pinching
Eliminate long term stress corrosion failure of control line
Improve clamping profile
Single or multiple encapsulation for ease of running and added protection
Encapsulation Materials:
Polypropylene -25C to 150C Good resistance to brines
Santoprene -30C to 150C Good resistance to brines
Nylon 11 -60C to 135C Good resistance to hydrocarbons, good abrasion resistance
PVDF -30C to 150C Good resistance to brines and hydrocarbons, good abrasion resistance
FEP -110C to 200C Good resistance to brines and hydrocarbons
Round Profiles of Single Control Line Encapsulation:
1/4’’ OD line tubing 0.433’’ Dia (11.0 mm)
3/8’’ OD line tubing 0.535’’ Dia (13.6 mm)
1/2’’ OD line tubing 0.660’’ Dia (16.8 mm)
Square Profiles of Single Control Line Encapsulation:
1/4’’ OD line tubing 0.433’’ x 0.433’’ (11.0 mm x 11.0 mm)
3/8’’ OD line tubing 0.535’’ x 0.535’’ (13.6 mm x 13.6 mm)
1/2’’ OD line tubing 0.660’’ x 0.660’’ (16.8 mm x 16.8 mm)
Other sizes on request
Available Alloy Grades for Control Line Tubing Inside Encapsulation
Austenitic: 316L
Duplex: S31803/S32205
S32750
Nickel alloy: N08825
N06625
Coiled Alloy Tubing Features
Close dimensional tolerances
Enhanced mechanical properties
Superior surface finish
High cleanness of inside surface
Controlled ovality, eccentricity
Coiled Tubing Process
TIG welded and cold drawn
Seamless and cold drawn
Coiled Tubing Dimension
Outside Diameter: 1/8’’ to 1-3/4’’ (3.175 mm to 44.45 mm)
Coiled tubing length: up to 32,808 feet (10,000 m)
Tubing with minimum orbital welds reduces the risk of leakages when connecting tubes, and suitable for delivery for customers need.
Single coiled tubing is available
The tubes are delivered with plastic caps for protection from potential contamination during storage.
Packing
Coiled tubing is level wound on the spool/reel
Metal reels and marking can be specified by the customer
MEILONG offers a range of industry standard tubing encapsulated in a variety of materials, such as polyurethane, polyethylene and polypropylene. The specified tubing material within these encapsulations is available in a range of sizes and colors for a variety of applications.
Down hole tubes
Subsea umbilical’s
Process constructions
General control system
Steam supply lines
Gas transport lines
Instrumentation
Features of Encapsulated Control Line:
Maximize protection of downhole line
Increase crush resistance during installation
Protect control line against abrasion and pinching
Eliminate long term stress corrosion failure of control line
Improve clamping profile
Single or multiple encapsulation for ease of running and added protection
Encapsulation Materials:
Polypropylene | -25C to 150C | Good resistance to brines |
Santoprene | -30C to 150C | Good resistance to brines |
Nylon 11 | -60C to 135C | Good resistance to hydrocarbons, good abrasion resistance |
PVDF | -30C to 150C | Good resistance to brines and hydrocarbons, good abrasion resistance |
FEP | -110C to 200C | Good resistance to brines and hydrocarbons |
Round Profiles of Single Control Line Encapsulation:
1/4’’ OD line tubing | 0.433’’ Dia (11.0 mm) |
3/8’’ OD line tubing | 0.535’’ Dia (13.6 mm) |
1/2’’ OD line tubing | 0.660’’ Dia (16.8 mm) |
Square Profiles of Single Control Line Encapsulation:
1/4’’ OD line tubing | 0.433’’ x 0.433’’ (11.0 mm x 11.0 mm) |
3/8’’ OD line tubing | 0.535’’ x 0.535’’ (13.6 mm x 13.6 mm) |
1/2’’ OD line tubing | 0.660’’ x 0.660’’ (16.8 mm x 16.8 mm) |
Other sizes on request
Available Alloy Grades for Control Line Tubing Inside Encapsulation
Austenitic: | 316L |
Duplex: | S31803/S32205 S32750 |
Nickel alloy: | N08825 N06625 |
Coiled Alloy Tubing Features
Close dimensional tolerances
Enhanced mechanical properties
Superior surface finish
High cleanness of inside surface
Controlled ovality, eccentricity
Coiled Tubing Process
TIG welded and cold drawn
Seamless and cold drawn
Coiled Tubing Dimension
Outside Diameter: 1/8’’ to 1-3/4’’ (3.175 mm to 44.45 mm)
Coiled tubing length: up to 32,808 feet (10,000 m)
Tubing with minimum orbital welds reduces the risk of leakages when connecting tubes, and suitable for delivery for customers need.
Single coiled tubing is available
The tubes are delivered with plastic caps for protection from potential contamination during storage.
Packing
Coiled tubing is level wound on the spool/reel
Metal reels and marking can be specified by the customer